The UEI Delta remote control is pre-oprogrammed at the factory to operate the Digital Adapter. The UEI Delta Remote also contains a universal TV libtrary to allow you to control the Power and Volume of your TV.
1. Turn on the TV
NOTE: Please read steps 2 to 4 completely before proceeding. Highlight or write down the codes and device you wish to program before moving on to step 2.
2. Press and hold
SET until the
Red Light blinks twice, then release
SET.
3. Locate the code for your device in
Manufacturer's Codes on the back of the user guide. Brands are listed in alphabetical order with the most popular codes listed first.
4. Enter the first five-digit code for your TV. If you perform this procuder correlty, the
Red Light will blick twice.
NOTE:If you enter an invalide code, the red light will display one long blink and exit the programming mode. Repeat steps 2 to 5 with a valid code.
5. Aim the remote control at your TV and press
Power once. The device should turn off. If it does not respond repeat steps 2 to 4, try each code listed for your brand until you find the one that works. If it still does not work, try Searching For Your Code.
6. For future reference, write your TV code down.
